Your current location : Home - Product - Rapid Heating&Cooling Mold Temperature Controller
Dual-Function Rapid Heating and Cooling Mold Temperature Controller
  • Dual-Function Rapid Heating and Cooling Mold Temperature Controller
  • Dual-Function Rapid Heating and Cooling Mold Temperature Controller
Dual-Function Rapid Heating and Cooling Mold Temperature Controller
Main features:
Dual-Function Rapid Heating and Cooling Mold Temperature Controller Features:Two dual vapor outlets, Temperatures of Front mold or Rear mold temperature could be adjusted independently.
Contact us
  • Summary
  • Parameter
  • Other

Rapid Heating and Rapid Cooling Injection Advantage and Features

1; Remove flow mark/shrinkage mark/welding mark etc.

2; Increase part surface glossy to mirror surface effect, and solve part shrinkage problem on surface .

3; Increase product surface scratch-resistant capability.

4; Reduce processing procedures (such as painting and plating),and increase the yield rate to 20-3%.

5; Improve Glass fiber rich surface issue on surface of fiberglass material, improve thin-wall injection Moulding, improve product quality and strength, reduce 60% cycle time of thick-wall injection Moulding.

6; For plastic part to be plated, it can improve the mirror effect,reduce fracture mark and defective rate during plating process.

7; lower injection pressure during production, extend lifespan of injection machine.

8; Removal of stress marks on part surface or shinny marks of texturing parts surface, remove hot runner product circle marks on surface and improve surface quality to best.



Function:

1: Two outlets;can output 2 temperatures at the same time, to control warpage of injection parts and meet precise product dimensions requirement.

2: one machine could realize dual color injection or single color injection production.



JD Rapid Heating and Cooling Mold Temperature Controlling Machines Specification


Rapid Heating and Cooling Mold Temperature Controlling Machines Parameter

项目 ITEM

单位 Unit

Model# JD-D-60

Model# JD-D-90

Model# JD-D-120

Model#JD-D-150

电源 Power Source

V

380V50HZ

380V50HZ

380V50HZ

380V50HZ

总功率 Total Power

KW

65

95

125

150

冷却泵流量 Flow rate of Cooling Pump

L/MIN

67

133

133

133

加热泵流量 Flow rate of Heating Pump

L/MIN

33

33

33

33

冷却进出口 Cooling Inlet/Outlet

MM

DN25

DN32

DN40

DN40

软水接口 Softener water Pipe

MM

DN25

DN25

DN25

DN25

分流器接口

Diverter Connector

8 in 8 out

(dual channels)

12 in 12 out

(dual channels)

12 in 12 out

(dual channels)

16 in 16 out

(dual channels)

外型尺寸

Dimensions

MM

1650*750*1500

1650*750*1500

1650*750*1700

1650*750*1700

重量 Gross Weight

KG

550

550

630

630

建议选用机台

Applicable Tonnage of Injection Machine

T

50-300

300-800

800-2000

1000-3000

机台功能

Machine Function

To coordinate with injection machine for single color or dual color injection, front mold and rear mold temperatures

could be controlled independently, for parts with high precision dimensions.(Optional remote control function)

多功能速冷速热高光无痕模温机外观图




Label:
Recommended products