Features: 1.Eliminate flow marks, vents mark and increase surface finish. 2.Eliminate vent mark, stress mark and welding line on texture surface 3.Eliminate rich fiber, welding line of Glass Fiber
Rapid Heating and Rapid Cooling Injection Advantage and Features
1; Remove flow mark/shrinkage mark/welding mark etc.
2; Increase part surface glossy to mirror surface effect, and solve part shrinkage problem on surface .
3; Increase product surface scratch-resistant capability.
4; Reduce processing procedures (such as painting and plating),and increase the yield rate of 20-30%.
5; Improve Glass fiber rich surface issue on surface of fiberglass material, improve thin-wall injection Moulding, improve product quality and strength, reduce 60% cycle time of thick-wall injection Moulding.
6; For plastic part to be plated, it can improve the mirror effect,reduce fracture mark and defective rate during plating process.
7; lower injection pressure during production, extend lifespan of injection machine.
8. Removal of stress marks on part surface or shinny marks of texturing parts surface, remove hot runner product circle marks on surface and improve surface quality to best.
JD Rapid Heating and Cooling Mold Temperature Controller Specification
|
|||||
Rapid Heating and Cooling Single Function Mold Temperature Controller Parameters |
|||||
项目 Item |
单位 Unit
|
Model# JD-S-60 |
Model# JD-S-90 |
Model# JD-S-120 |
Model# JD-S-150 |
电源 Power Source
|
V |
380V;50HZ |
380V;50HZ |
380V;50HZ |
380V;50HZ |
总功率 Total Power
|
KW |
65 |
95 |
125 |
150 |
冷却泵流量 Flow Rate of Cooling Pump
|
L/MIN |
67 |
133 |
133 |
133 |
加热泵流量 Flow Rate of Heating Pump
|
L/MIN |
33 |
33 |
33 |
33 |
冷却进出口 Cooling Water Inlet/Outlet
|
MM |
DN25 |
DN32 |
DN40 |
DN40 |
软水接口 Soften Water Connector
|
MM |
DN25 |
DN25 |
DN25 |
DN25 |
分流器接口 Diverter Connector
|
|
8 in 8 out
|
12 in 12 out
|
12 in 12 out
|
16 in 16 out
|
外型尺寸 Dimensions
|
CM |
1650*750*1500
|
1650*750*1500
|
1650*750*1700
|
1650*750*1700
|
重量 Gross Weight
|
KG |
550 |
550
|
630
|
630
|
建议选用机台 Applicable Tonnage of injection machine
|
T |
50-300
|
300-800 |
800-2000
|
1000-3000
|
机台功能 Function
|
To coordinate with injection machine for single color injection requirement (Optional remote control function)
|
单功能速冷速热高光无痕模温机
单功能速冷速热高光无痕模温机侧面图
扫码查看手机站