English Chinese
Your current location : Home - Service support - FAQ
Service philosophy FAQ Download 
Maintenance and inspection
Please keep the mold thermostat clean and dry.
Periodically turn off the power, open all the covers, and remove dust and
  • The mainA tank does not heat up
    situation:
    The mainA tank does not heat up
    the reason:
    The program does not heat automatically.
    deal with:
    The upper and lower limits of the main tank are not set.
    The main tank has insufficient water level or leaks.
  • There is water droplets in the drain
    situation:
    There is water droplets in the drain
    the reason:
    The safety valve is forced open.
    deal with:
    Heat the contactor contacts to fire the connection and replace the contactor.
  • Safety valve forced open during production
    situation:
    Safety valve forced open during production
    the reason:
    Insufficient air pressure; the valve cannot be opened.
    deal with:
    Check if the air supply is adequately pressurized.
    Do not trim the pressure reducing valve to set the air pressure.

National Service Hotline

0755-29542321

Copyright：Shenzhen Jiding Technology Co., Ltd.
Head office address：Building 22#, the 7th Floor, Chuangye Industrial Area, Shapuwei Community, Songgang Sub-district, Bao'an, Shenzhen, China
Record number：粤ICP备13072911号 工商网监电子标识号：CE1511060322320543

Brand website：CTMON

友情链接 友情链接 友情链接 友情链接 友情链接